3 Reasons Why Kelowna Residents Have a Lack of Hot Water

WATER PRESSUre in Kelowna

If you are Kelowna resident, you mostly likely heard about that issue before. According to these licensed plumbers that are operating in Kelowna area in BC, there are a multitude of reasons that can cause it:

  • corrosion in the branch piping or defective valves
  • faulty fixtures or mechanical equipment
  • air circulating in the system
  • a buildup of sediment somewhere

and the list goes on… Let’s check the 3 most common reasons and possible solutions.

3 Common Reasons Of a Lack of Hot Water Pressure in Kelowna

1. Clogged Drains

An obstructed aerator is the probably reason for low water pressure in a sink spigot. Evacuate the aerator with a couple of pincers (see pic). Cut you high temp water on with the aerator evacuated to check whether you have more weight. Make sure to clean your aerator. Tap it on the ledge and within parts will turn out. Give it a decent cleaning, set up it back together and reinstall it. Presently check the boiling water pressure. In the event that cleaning the aerator didn’t help go to the subsequent stage.

2. You Have a Partially Closed Valve

The most harmless reason for low boiling water weight is basically that the valve answerable for controlling the progression of water could have turned out to be halfway shut. In the event that your house is just influenced by low high temp water rather than both low cold and boiling water, all things considered, your water warmer’s valve is the reason.

3. You Have Leaky or Broken Pipes

A progressively genuine motivation of low high temp water weight is defective or broken channels. In the event that you are encountering low boiling water pressure all through your home, this might be the situation. Check for any moist covers or holes on the divider.

So that’s pretty much it!


Kelowna has nothing common with these problems!

Leave a Reply

Your email address will not be published.